feat(lsp): fix lsp format code

nvim/after/plugin/barbar.lua

@@ -1,141 +0,0 @@
-local map = vim.api.nvim_set_keymap
-local opts = { noremap = true, silent = true }
-
--- Move to previous/next
-map('n', '<A-,>', '<Cmd>BufferPrevious<CR>', opts)
-map('n', '<A-.>', '<Cmd>BufferNext<CR>', opts)
--- Re-order to previous/next
-map('n', '<A-<>', '<Cmd>BufferMovePrevious<CR>', opts)
-map('n', '<A->>', '<Cmd>BufferMoveNext<CR>', opts)
--- Goto buffer in position...
-map('n', '<A-1>', '<Cmd>BufferGoto 1<CR>', opts)
-map('n', '<A-2>', '<Cmd>BufferGoto 2<CR>', opts)
-map('n', '<A-3>', '<Cmd>BufferGoto 3<CR>', opts)
-map('n', '<A-4>', '<Cmd>BufferGoto 4<CR>', opts)
-map('n', '<A-5>', '<Cmd>BufferGoto 5<CR>', opts)
-map('n', '<A-6>', '<Cmd>BufferGoto 6<CR>', opts)
-map('n', '<A-7>', '<Cmd>BufferGoto 7<CR>', opts)
-map('n', '<A-8>', '<Cmd>BufferGoto 8<CR>', opts)
-map('n', '<A-9>', '<Cmd>BufferGoto 9<CR>', opts)
-map('n', '<A-0>', '<Cmd>BufferLast<CR>', opts)
--- Pin/unpin buffer
-map('n', '<A-p>', '<Cmd>BufferPin<CR>', opts)
--- Close buffer
-map('n', '<A-c>', '<Cmd>BufferClose<CR>', opts)
--- Wipeout buffer
---                 :BufferWipeout
--- Close commands
---                 :BufferCloseAllButCurrent
---                 :BufferCloseAllButPinned
---                 :BufferCloseAllButCurrentOrPinned
---                 :BufferCloseBuffersLeft
---                 :BufferCloseBuffersRight
--- Magic buffer-picking mode
-map('n', '<C-p>', '<Cmd>BufferPick<CR>', opts)
--- Sort automatically by...
-map('n', '<Space>bb', '<Cmd>BufferOrderByBufferNumber<CR>', opts)
-map('n', '<Space>bd', '<Cmd>BufferOrderByDirectory<CR>', opts)
-map('n', '<Space>bl', '<Cmd>BufferOrderByLanguage<CR>', opts)
-map('n', '<Space>bw', '<Cmd>BufferOrderByWindowNumber<CR>', opts)
-
--- Other:
--- :BarbarEnable - enables barbar (enabled by default)
--- :BarbarDisable - very bad command, should never be used
---
--- Set barbar's options
-require'bufferline'.setup {
-  -- Enable/disable animations
-  animation = true,
-
-  -- Enable/disable auto-hiding the tab bar when there is a single buffer
-  auto_hide = false,
-
-  -- Enable/disable current/total tabpages indicator (top right corner)
-  tabpages = true,
-
-  -- Enable/disable close button
-  closable = true,
-
-  -- Enables/disable clickable tabs
-  --  - left-click: go to buffer
-  --  - middle-click: delete buffer
-  clickable = true,
-
-  -- Enables / disables diagnostic symbols
-  diagnostics = {
-    -- you can use a list
-    {enabled = true, icon = 'ff'}, -- ERROR
-    {enabled = false}, -- WARN
-    {enabled = false}, -- INFO
-    {enabled = true},  -- HINT
-
-    -- OR `vim.diagnostic.severity`
-    [vim.diagnostic.severity.ERROR] = {enabled = true, icon = 'ff'},
-    [vim.diagnostic.severity.WARN] = {enabled = false},
-    [vim.diagnostic.severity.INFO] = {enabled = false},
-    [vim.diagnostic.severity.HINT] = {enabled = true},
-  },
-
-  -- Excludes buffers from the tabline
-  exclude_ft = {'javascript'},
-  exclude_name = {'package.json'},
-
-  -- Hide inactive buffers and file extensions. Other options are `alternate`, `current`, and `visible`.
-  hide = {extensions = true, inactive = true},
-
-  -- Disable highlighting alternate buffers
-  highlight_alternate = false,
-
-  -- Disable highlighting file icons in inactive buffers
-  highlight_inactive_file_icons = false,
-
-  -- Enable highlighting visible buffers
-  highlight_visible = true,
-
-  -- Enable/disable icons
-  -- if set to 'numbers', will show buffer index in the tabline
-  -- if set to 'both', will show buffer index and icons in the tabline
-  icons = false,
-
-  -- If set, the icon color will follow its corresponding buffer
-  -- highlight group. By default, the Buffer*Icon group is linked to the
-  -- Buffer* group (see Highlighting below). Otherwise, it will take its
-  -- default value as defined by devicons.
-  icon_custom_colors = false,
-
-  -- Configure icons on the bufferline.
-  icon_separator_active = '▎',
-  icon_separator_inactive = '▎',
-  icon_close_tab = '',
-  icon_close_tab_modified = '●',
-  icon_pinned = '車',
-
-  -- If true, new buffers will be inserted at the start/end of the list.
-  -- Default is to insert after current buffer.
-  insert_at_end = false,
-  insert_at_start = false,
-
-  -- Sets the maximum padding width with which to surround each tab
-  maximum_padding = 1,
-
-  -- Sets the minimum padding width with which to surround each tab
-  minimum_padding = 1,
-
-  -- Sets the maximum buffer name length.
-  maximum_length = 30,
-
-  -- If set, the letters for each buffer in buffer-pick mode will be
-  -- assigned based on their name. Otherwise or in case all letters are
-  -- already assigned, the behavior is to assign letters in order of
-  -- usability (see order below)
-  semantic_letters = true,
-
-  -- New buffer letters are assigned in this order. This order is
-  -- optimal for the qwerty keyboard layout but might need adjustement
-  -- for other layouts.
-  letters = 'asdfjkl;ghnmxcvbziowerutyqpASDFJKLGHNMXCVBZIOWERUTYQP',
-
-  -- Sets the name of unnamed buffers. By default format is "[Buffer X]"
-  -- where X is the buffer number. But only a static string is accepted here.
-  no_name_title = nil,
-}

nvim/after/plugin/lsp.lua

@@ -4,23 +4,36 @@ lsp.preset('recommended')
 lsp.ensure_installed({
 	'tsserver',
 	'eslint',
-    'lua_ls',
 	'gopls',
 	'rust_analyzer',
-	'clangd'
+    'rustfmt',
+	'clangd',
+    'lua_language_server',
 })
 
 
--- Fix Undefined global 'vim'
-lsp.configure('lua_ls', {
-    settings = {
-        Lua = {
-            diagnostics = {
-                globals = { 'vim' }
-            }
-        }
-    }
-})
+require'lspconfig'.lua_ls.setup {
+  settings = {
+    Lua = {
+      runtime = {
+        -- Tell the language server which version of Lua you're using (most likely LuaJIT in the case of Neovim)
+        version = 'LuaJIT',
+      },
+      diagnostics = {
+        -- Get the language server to recognize the `vim` global
+        globals = {'vim'},
+      },
+      workspace = {
+        -- Make the server aware of Neovim runtime files
+        library = vim.api.nvim_get_runtime_file("", true),
+      },
+      -- Do not send telemetry data containing a randomized but unique identifier
+      telemetry = {
+        enable = false,
+      },
+    },
+  },
+}
 
 
 local cmp = require'cmp'
@@ -60,9 +73,20 @@ cmp.setup({
         }
 })
 
+lsp.set_preferences({
+    suggest_lsp_servers = false,
+    sign_icons = {
+        error = 'E',
+        warn = 'W',
+        hint = 'H',
+        info = 'I'
+    }
+})
+
 
 local opts = { noremap=true, silent=true }
 
+
 lsp.on_attach(function(client, bufnr)
 	  vim.api.nvim_buf_set_option(bufnr, 'omnifunc', 'v:lua.vim.lsp.omnifunc')
 
@@ -80,13 +104,17 @@ lsp.on_attach(function(client, bufnr)
   vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>rn', '<cmd>lua vim.lsp.buf.rename()<CR>', opts)
   vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>ca', '<cmd>lua vim.lsp.buf.code_action()<CR>', opts)
   vim.api.nvim_buf_set_keymap(bufnr, 'n', 'gr', '<cmd>lua vim.lsp.buf.references()<CR>', opts)
-  vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>f', '<cmd>lua vim.lsp.buf.formatting()<CR>', opts)
-
   vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>e', '<cmd>lua vim.diagnostic.open_float()<CR>', opts)
+  vim.keymap.set('n', '<space>f', function()
+      vim.lsp.buf.format { async = true }
+    end, opts)
 
 end)
 
 
 lsp.setup()
+vim.diagnostic.config({
+    virtual_text = true
+})